NEW Rewards Programme - Start saving today to get a 10% off voucher
Guides n Blanks
My Account
0
Where am I?

More guides aid in decreasing line twist trouble being happened with spinning tackle. Line twist is reduced in spinning tackle when using the FUJI GUIDE CONCEPT.

Why does the line twist happen? The below picture shows line twist.

The line which was released from the spool is sent out with it twisted equally

The twist happened above comes back little by little and is retrieved to the spool.

Regarding the spinning reel, it is repeated for line to be twisted and come back‘ However, since the line is damaged by line roller of the reel and resistance of the guide, the twist is sent to the tip section and stores there.

With few guides since guides resistance is high, line twist is hard to pass and tends to accumulate. If the number of the guide is a lot, it is easier for twist to pass through and harder for it to store since the resistance of the guide is small.

With FUJI CONCEPT of guide setting rod. more guides lessen the angle as line passes through the guide, reducing pressure on the guide, and in turn reducing the amount of line twist.

FUJI's original function to hold the ring

Drawing-pressed frame

Since conventional structure supports ring at a "point", it tends to depend for intensity on frame thickness. But drawing-pressed frame can secure the same ring holding power
as conventional structure even if making frame thinner by wrapping in ring broadly by the process such as draw. twist, and bend. Furthermore, it makes possible to mount thinner ring and the weight saving in both frame and ring.

« Fuji Guide Concept Feature 6 - Maximizes Rod Power | Fuji Guide Concept Feature 8 - Reduced line tangling »